This artist concept of the proposed NASA Mars Sample Return mission shows rendezvous of the orbiting sample container with the Earth return vehicle.
Rendezvous in Space
AS11-44-6642 (21 July 1969) --- The Apollo 11 Lunar Module ascent stage, with astronauts Neil A. Armstrong and Edwin E. Aldrin Jr. aboard, is photographed from the Command and Service Modules (CSM) during rendezvous in lunar orbit. The Lunar Module (LM) was making its docking approach to the CSM. Astronaut Michael Collins remained with the CSM in lunar orbit while the other two crewmen explored the lunar surface. The large, dark-colored area in the background is Smyth's Sea, centered at 85 degrees east longitude and 2 degrees south latitude on the lunar surface (nearside). This view looks west. The Earth rises above the lunar horizon.
Apollo 11 Lunar Module ascent stage photographed from Command Module
SL2-07-651 (22 June 1973) --- This overhead view of the Skylab Space Station was taken from the Departing Skylab Command/Service Module during the Skylab 2's final fly-around inspection. The single solar panel is quite evident as well as the parasol solar shield, rigged to replace the missing micrometeoroid shield. Both the second solar panel and the micrometeoroid shield were torn away during a mishap in the original Skylab 1 liftoff and orbital insertion. Photo credit: NASA
Skylab 2 Farewell View from the Departing Skylab Command/Service Module
This view of the Skylab Orbital Space Station was taken from the Skylab 2 Command/Service Module during it's initial fly around inspection. The micrometeoroid shield can be seen to be missing and a parasol solar shield was later fitted in its place. The damaged and partially deployed solar array, in the center of the scene, can be seen to be restrained by a strap that was later cut during an early EVA, allowing the panel to fully deploy.
Rendezvous and Fly Around Inspection of Skylab I Orbital Space Station
This close up view of one of the two scientific airlocks on the Skylab Orbital Workshop Section was taken from the Skylab 2 Command/Service Module during its initial fly around inspection. The micrometeoroid shield can be seen to be missing from this section of the orbital workshop. A parasol solar shield was later devised and put in place over this damaged area through this very same airlock opening.
One of the Two Scientific Airlocks on the Orbital Workshop Section
SL2-4-265 (25 May 1973) --- Skylab 2, approach to Skylab at long range, fly-around inspection. Orbital Workshop with area of missing micrometeoroid shield visible and partially deployed solar array visible. Photo credit: NASA
Rendezvous and Fly Around Inspection of Skylab I Orbital Space Station
S65-28653 (August 1965) --- Rendezvous Evaluation Pod (REP) in orbit is approached by Gemini spacecraft as seen in this artist's concept using an actual photograph taken on the Gemini-4 mission. The REP is superimposed over a Gemini-4 Earth-sky picture of cloud formations over an ocean. The REP will be used by the crew of the Gemini-5 spacecraft to practice rendezvous techniques.
GEMINI RENDEZVOUS EVALUATION POD (REP) - ARTIST CONCEPT
S135-E-006784 (10 July 2011) --- This is one of a series of images showing the International Space Station photographed by a crewmember onboard the space shuttle Atlantis as the two spacecraft performed rendezvous and docking operations on the STS-135 mission's third day in Earth orbit. Photo credit: NASA
ISS during STS-135 Approach
ISS038-E-028055 (12 Jan. 2014) --- Intersecting the thin line of Earth's atmosphere, the Orbital Sciences Corp. Cygnus commercial cargo craft attached to the end of the Canadarm2 robotic arm of the International Space Station is photographed by an Expedition 38 crew member during rendezvous and berthing operations on Jan. 12, 2014.
Cygnus Capture
ISS035-E-029752 (26 April 2013) ---  Russian cosmonauts Roman Romanenko, foreground, and  Alexander Misurkin busy themselves with various chores in the Zvezda service module aboard the Earth-orbiting International Space Station during the rendezvous and docking of the Progress 51 cargo craft.
Romanenko and Misurkin following Progress 51P Docking
ISS035-E-029752 (26 April 2013) ---  Russian cosmonauts Roman Romanenko, foreground, and  Alexander Misurkin busy themselves with various chores in the Zvezda service module aboard the Earth-orbiting International Space Station during the rendezvous and docking of the Progress 51 cargo craft.
Romanenko and Misurkin following Progress 51P Docking
S135-E-006787 (10 July 2011) --- This is one of a series of images showing the International Space Station photographed by a crewmember onboard the space shuttle Atlantis as the two spacecraft performed rendezvous and docking operations on the STS-135 mission's third day in Earth orbit. Photo credit: NASA
ISS Segments during STS-135 Approach
S135-E-006777 (10 July 2011) --- This is one of a series of images showing the International Space Station photographed by a crewmember onboard the space shuttle Atlantis as the two spacecraft performed rendezvous and docking operations on the STS-135 mission's third day in Earth orbit.  Photo credit: NASA
ISS during STS-135 Approach
S135-E-006702 (10 July 2011) --- This is one of a series of images showing the International Space Station photographed by a crewmember onboard the space shuttle Atlantis as the two spacecraft performed rendezvous and docking operations on the STS-135 mission's third day in Earth orbit. Photo credit: NASA
ISS during STS-135 Approach
STS072-302-029 (11-20 Jan. 1996) --- Astronaut Brent W. Jett Jr. mans the pilot’s station aboard the Space Shuttle Endeavour during rendezvous operations with the Japanese Space Flyer Unit (SFU).  The pilot joined five other astronauts for a week a half aboard Endeavour in Earth-orbit.
Crew procedures and preparations for rendezvous
ISS038-E-027448 (12 Jan. 2014) --- The Orbital Sciences Corp. Cygnus commercial cargo craft is photographed by an Expedition 38 crew member on the International Space Station during rendezvous and berthing operations on Jan. 12, 2014. A cloud-covered part of Earth provides the backdrop for the scene.
Cygnus Capture
A Titan booster launched the Gemini 8 spacecraft on March 16, 1966 from launch complex 19 Cape Kennedy, Florida. The flight crew for the 3 day mission, astronauts Neil A. Armstrong and David R. Scott, achieved the first rendezvous and docking to Atlas/Agena in Earth orbit.
Early Rockets
STS072-301-035 (11-20 Jan. 1996) --- Astronaut Brian Duffy mans the commander's station aboard the Space Shuttle Endeavour during rendezvous operations with the Japanese Space Flyer Unit (SFU).  The mission commander was joined aboard Endeavour by five other astronauts for a week a half in Earth-orbit.
Commander Brian Duffy and Pilot Brent Jett go through rendezvous procedures
ISS038-E-027441 (12 Jan. 2014) --- The Orbital Sciences Corp. Cygnus commercial cargo craft is photographed by an Expedition 38 crew member on the International Space Station during rendezvous and berthing operations on Jan. 12, 2014. A blue and white part of Earth provides the backdrop for the scene.
Cygnus Capture
S135-E-006700 (10 July 2011) ---  This is one of a series of images showing the International Space Station photographed by a crewmember onboard the space shuttle Atlantis as the two spacecraft performed rendezvous and docking operations on the STS-135 mission's third day in Earth orbit. Photo credit: NASA
ISS during STS-135 Approach
S135-E-006698 (10 July 2011) --- This is one of a series of images showing the International Space Station photographed by a crewmember onboard the space shuttle Atlantis as the two spacecraft performed rendezvous and docking operations on the STS-135 mission's third day in Earth orbit. Photo credit: NASA
ISS during STS-135 Approach
On March 16, 1966, an Atlas booster launched an Agena Target Vehicle for the Gemini 8 mission. The flight crew for the 3 day mission, astronauts Neil A. Armstrong and David R. Scott, achieved the first rendezvous and docking to Atlas/Agena in Earth orbit.
Early Rockets
AST-02-096 (18 July 1975) --- This scene photograph from a rendezvous window of the American Apollo spacecraft in Earth orbit shows the Soviet Soyuz spacecraft contrasted against a black-sky background with a heavily cloud-covered Earth below. The three major components of the Soyuz are the spherical-shaped Orbital Module, the bell-shaped Descent Vehicle, the cylindrical-shaped Instrument Assembly Module. The docking system on the Orbital Module was specially designed to interface with the docking system on the Apollo's Docking Module. The ASTP astronauts and cosmonauts visited each other's spacecraft while the Soyuz and Apollo were docked in Earth orbit for two days.
Soviet Soyuz spacecraft contrasted against a black-sky background
The Earth Return Orbiter (ERO) is one of the flight missions making up the Mars Sample Return campaign to bring martian rock and atmospheric samples back to Earth.  This European Space Agency (ESA) orbiter would be the first interplanetary spacecraft to capture samples in orbit and make a return trip between Earth and Mars. ERO would also be the largest spacecraft to orbit the Red Planet. In addition to the rendezvous and return mission, ERO would provide critical Mars-Earth communications coverage for NASA's Perseverance rover and the Sample Retrieval Lander to deliver the martian samples.  The Earth Return Orbiter is part of the multi-mission Mars Sample Return campaign being planned by NASA and the European Space Agency (ESA).  https://photojournal.jpl.nasa.gov/catalog/PIA25891
Artist's concept of the Earth Return Orbiter over Mars
ISS028-E-015111 (10 July 2011) --- NASA astronaut Doug Hurley, STS-135 pilot, aims a range finder toward the International Space Station during rendezvous operations between the station and the space shuttle Atlantis. Whereas Hurley's hands are clearly seen, his face is largely obscured by darkness. This is one of a series of images showing various parts of Atlantis in Earth orbit as photographed by one of the six crewmembers on the station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS016-E-006285 (25 Oct. 2007) --- Backdropped by a blue and white Earth, Space Shuttle Discovery is seen from the International Space Station as the two spacecraft perform rendezvous and docking operations in Earth orbit. Docking occurred at 7:40 a.m. (CDT) on Oct. 25, 2007. The Harmony node is visible in Discovery's cargo bay.
Discovery and Payload on approach to the ISS during the STS-120 Mission
S127-E-012776 (30 July 2009) --- Backdropped by Earth?s horizon and the blackness of space, a Dual RF Astrodynamic GPS Orbital Navigator Satellite (DRAGONSat) is photographed after its release from Space Shuttle Endeavour?s payload bay by STS-127 crew members. DRAGONSat will look at independent rendezvous of spacecraft in orbit using Global Positioning Satellite data. The two satellites were designed and built by students at the University of Texas, Austin, and Texas A&M University, College Station.
Earth Observations taken by STS-127 Crew
S127-E-012774 (30 July 2009) --- Backdropped by Earth?s horizon and the blackness of space, a Dual RF Astrodynamic GPS Orbital Navigator Satellite (DRAGONSat) is photographed after its release from Space Shuttle Endeavour?s payload bay by STS-127 crew members. DRAGONSat will look at independent rendezvous of spacecraft in orbit using Global Positioning Satellite data. The two satellites were designed and built by students at the University of Texas, Austin, and Texas A&M University, College Station.
Earth Observations taken by STS-127 Crew
This illustration shows the proposed Capture, Containment, and Return System, a NASA payload on the European Space Agency's Earth Return Orbiter. As part of the Mars Sample Return Campaign, samples collected by NASA's Mars Perseverance Rover would be launched into Mars orbit within sealed tubes inside an Orbiting Sample container. The Earth Return Orbiter would then rendezvous with this container, and the Capture, Containment, and Return System would be tasked with capturing the Orbiting Sample container, orienting it, sterilizing its exterior, and transferring it into a clean zone for secondary containment, toward safe return to Earth.  The Capture, Containment, and Return System is part of the multi-mission Mars Sample Return program being planned by NASA and European Space Agency (ESA).  https://photojournal.jpl.nasa.gov/catalog/PIA25860
Illustration of the Capture, Containment, and Return System for Mars Sample Return
AST-02-093 (18 July 1975) --- This scene photographed with a hand-held 70mm camera from a rendezvous window of the American Apollo spacecraft in Earth orbit shows the Soviet Soyuz spacecraft contrasted against a black-sky background with Earth's horizon below.  The three major components of the Soyuz are the spherical-shaped Orbital Module (OM), the bell-shaped Descent Vehicle (DV) and the cylindrical-shaped instrument Assembly Module (AM). The docking system on the Orbital Module was specially designed to interface with the docking system on the Apollo's Docking Module (DM). The DM is visible very faintly at the bottom of the picture. The ASTP astronauts and cosmonauts visited each other's spacecraft while the Soyuz and Apollo were docked in Earth orbit for two days.
Soviet Soyuz spacecraft contrasted against a black-sky background
The Earth Return Orbiter (ERO) is one of the flight missions making up the Mars Sample Return campaign to bring martian rock and atmospheric samples back to Earth. The ESA orbiter would be the first interplanetary spacecraft to capture samples in orbit and make a return trip between Earth and Mars.  The primary mission of the European spacecraft would be to find, fly to, and capture a volleyball-sized capsule called the Orbiting Sample (OS) container launched from the surface of Mars by NASA's Mars Ascent System and carrying a carefully selected set of samples previously collected on the surface of Mars by NASA's Perseverance rover.  Having already spent three years to reach Mars and perform its rendezvous and capture mission, ERO would take a further two years to fly from its operational orbit around Mars up to escape altitude and make its way back to Earth. When ERO is about three days from Earth, the Earth Entry System (EES) carrying the OS would separate from the spacecraft and be placed on a precision trajectory for Earth entry and landing.  The Earth Return Orbiter is part of the multi-mission Mars Sample Return campaign being planned by NASA and the European Space Agency (ESA).  https://photojournal.jpl.nasa.gov/catalog/PIA25893
Artist's Concept of Earth Return Orbiter Releasing Capsule containing Martian Samples
KENNEDY SPACE CENTER, FLA. --  The Commanding Officer of the USS New Orleans, Captain Ralph E. Neiger, welcomes aboard ASTP astronauts Thomas Stafford, Donald Slayton and Vance Brand.  The astronauts splashed down in the Pacific Ocean west of Hawaii at 5:18 p.m. today, ending the nine-day ASTP mission.  Themission was highlighted by the rendezvous and docking with a Soviet Soyuz spacecraft in Earth orbit.
KSC-75P-408
ISS028-E-015671 (10 July 2011) --- This head-on picture of Atlantis' nose and part of the underside's thermal protective system tiles is one of a series of images showing various parts of the shuttle in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
KENNEDY SPACE CENTER, FLA. --  The ASTP Apollo Command Module is lowered onto the deck of the USS New Orleans following splashdown in the Pacific Ocean, west of Hawaii, at 5:18 p.m. today.  Once aboard the ship, the ASTP astronauts Thomas Stafford, Vance Brand, and Donald Slayton emerged from the spacecraft and participated in ceremonies during which they spoke by telephone to President Gerald Ford.  The splashdown ended the crew's historic nine-day mission, highlighted by their rendezvous and docking with a Soviet Soyuz spacecraft while in Earth orbit.
KSC-75P-405
ISS028-E-015099 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS040-E-068644 (16 July 2014) --- The Orbital Sciences? Cygnus cargo craft (bottom center) is photographed by an Expedition 40 crew member on the International Space Station during rendezvous and capture operations. The two spacecraft converged at 6:36 a.m. (EDT) on July 16, 2014. Also visible in this image are the station?s Cupola and the Tranquility node (top) and Canadarm2 (center) along with a Russian Soyuz spacecraft docked to the station. Earth?s horizon and the blackness of space provide the backdrop for the scene.
Cygnus approach
ISS028-E-015647 (10 July 2011) --- This picture of Atlantis' main and subsystem engines is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015597  (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015081 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015380 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
S69-19796 (February 1969) --- Composite of six artist's concepts illustrating key events, tasks and activities on the fifth day of the Apollo 9 mission, including vehicles undocked, Lunar Module burns for rendezvous, maximum separation, ascent propulsion system burn, formation flying and docking, and Lunar Module jettison ascent burn. The Apollo 9 mission will evaluate spacecraft lunar module systems performance during manned Earth-orbital flight.
ART CONCEPTS - APOLLO IX
iss068e044261 (Jan. 31, 2023) --- Flight support equipment is pictured descending toward the Earth's atmosphere after being jettisoned from the grips of the Canadarm2 robotic arm. The flight hardware secured a pair of roll-out solar arrays inside SpaceX Dragon cargo ship’s trunk during its ascent to orbit and rendezvous with the International Space Station in November 2022. The jettisoned support equipment drifted safely away from the station and will eventually harmlessly burn up in the atmosphere with no chance for recontacting the space station.
iss068e044261
ISS028-E-015594 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015668 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015094  (10 July 2011) --- This nose view is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015141 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
S100-E-5048 (21 April 2001) --- Astronaut Jeffrey S. Ashby, pilot, prepares to use a camera for out-the-window imagery from the aft flight deck of the Earth-orbiting Space Shuttle Endeavour.  The seven-member STS-100 crew is moving toward a rendezvous with the International Space Station (ISS).  The image was recorded with a digital still camera
Pilot Ashby prepares to use a Hasselblad camera on the aft flight deck of Endeavour
ISS040-E-068656 (16 July 2014) --- The Orbital Sciences? Cygnus cargo craft (bottom center) is photographed by an Expedition 40 crew member on the International Space Station during rendezvous and capture operations. The two spacecraft converged at 6:36 a.m. (EDT) on July 16, 2014. Also visible in this image are the station?s Cupola and the Tranquility node (top) and Canadarm2 (center) along with a Russian Soyuz spacecraft docked to the station. A cloud-covered part of Earth provides the backdrop for the scene.
Cygnus approach
S74-14949 (October 1974) --- Artist?s drawings and call-outs depict phases of the joint U.S.-USSR Apollo-Soyuz Test Project, an Earth-orbital mission which will feature rendezvous and docking of the respective spacecraft of the two nations. ASTP crewmen for the USSR include Aleksey A. Leonov and Valeriy N. Kubasov. The astronaut team includes astronauts Thomas P. Stafford, Vance D. Brand and Donald K. Slayton. The mission is scheduled to take place in summer 1975.
Artist's concept of ASTP mission profile
NM18-309-021 (28 June 1995) --- The Space Shuttle Atlantis orbits Earth at a point above Uzbekistan and the southern Aral Sea, as photographed by one of the Mir-18 crew members aboard Russia's Mir Space Station. The image was photographed prior to rendezvous and docking of the two spacecraft. The Spacelab Science Module and the tunnel connecting it to the crew cabin, as well as the added mechanism for interface with the Mir's docking system can be easily seen in the photo.
Space shuttle Atlantis preparing to dock with Mir space station
S75-28682 (17 July 1975) --- An overall view of the Mission Operations Control Room in the Mission Control Center during the joint U.S.-USSR Apollo-Soyuz Test Project docking mission in Earth orbit. The large television monitor shows a view of the Soyuz spacecraft as seen from the Apollo spacecraft during rendezvous and docking maneuvers. Eugene F. Kranz, JSC Deputy Director of Flight Operations, is standing in the foreground. M.P. Frank, the American senior ASTP flight director, is partially obscured on the right.
MISSION CONTROL CENTER (MCC) - APOLLO-SOYUZ TEST PROJECT (ASTP) - JSC
ISS028-E-015128 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  An 800mm lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015127 (10 July 2011) ---This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
STS102-E-5088  (10 March 2001 ) --- Low-angle view on flight deck showing astronaut James S. Voss, STS-102 mission specialist, with a camera during rendezvous operations. Voss is one of two astronauts assigned to space walk duties after the Space Shuttle Discovery and the International Space Station (ISS) link in Earth orbit.  The photograph was recorded with a digital still camera.
Voss on the flight deck with camera during rendezvous ops
ISS028-E-015155 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015178 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS003-E-8326 (7 Dec 2001) --- The Space Shuttle Endeavour, controlled by the flight crew of STS-108, is backdropped over a large area of cloud  cover on Earth as it nears its rendezvous with the International Space Station (ISS). The Raffaello logistics module that is being brought up to the orbiting outpost is clearly visible in Endeavour's cargo bay.  Among other activities the Endeavour's mission will include the change out of the station crews.  The image was recorded with a digital still camera.
View of the docking approach of Endeavour taken during Expedition Three
ISS028-E-015328 (10 July 2011) --- Parts of Atlantis' set of main engines are visible in one of a series of images showing various parts of the space shuttle in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015600  (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
S75-28683 (17 July 1975) --- An overall view of the Mission Operations Control Room in the Mission Control Center during the joint U.S.-USSR Apollo-Soyuz Test Project docking mission in Earth orbit. M.P. Frank, the American senior ASTP flight director, is seated at his console in the right foreground. He is watching the large television monitor which shows a view of the Soyuz spacecraft as seen from the Apollo spacecraft during rendezvous and docking maneuvers.
MISSION CONTROL CENTER (MCC) - APOLLO-SOYUZ TEST PROJECT (ASTP) - JSC
ISS028-E-015135 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015659 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015396 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three  crewmembers – half the International Space Station   crew – who were equipped with still cameras for this purpose on t station  as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS037-E-003897 (29 Sept. 2013) --- The first Cygnus commercial cargo spacecraft built by Orbital Sciences Corp., in the grasp of the Canadarm2, is photographed by an Expedition 37 crew member on the International Space Station during rendezvous, capture and docking operations. The two spacecraft converged at 7:01 a.m. EDT on Sept. 29, 2013. Earth’s horizon and the blackness of space provide the backdrop for the scene.
Cygnus Capture by Canadarm2
iss068e044174 (Jan. 31, 2023) --- The Canadarm2 robotic arm is pictured extending away from the International Space Station after jettisoning flight support equipment toward the Earth's atmosphere. The flight hardware secured a pair of roll-out solar arrays inside the SpaceX Dragon cargo ship’s trunk during its ascent to orbit and rendezvous with the space station in November 2022. The jettisoned support equipment drifted safely away from the station and will eventually harmlessly burn up in the atmosphere with no chance for recontacting the space station.
iss068e044174
ISS028-E-015129 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015148 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015662 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015086   (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015116 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015593  (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015599  (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
JSC2000-E-22726 (10 Sept. 2000) --- From his console in Houston's Mission Control Center (MCC), lead Flight Director Phil Engelauf intently watches a monitor during the rendezvous operations between the Space Shuttle Atlantis and the International Space Station in Earth orbit. Partially visible in the background are astronauts Gerhard P.J. Thiele and Chris A. Hadfield, at the Spacecraft Communicator (CAPCOM) console.
Various views of personnel in MCC during STS-106
ISS003-E-8328 (7 December 2001) --- The Space Shuttle Endeavour, controlled by the flight crew of STS-108, is backdropped over a large area of cloud  cover on Earth as it nears its rendezvous with the International Space Station (ISS). The Raffaello logistics module that is being brought up to the orbiting outpost is clearly visible in Endeavour's cargo bay.  Among other activities the Endeavour's mission will include the change out of the station crews.  The image was recorded with a digital still camera.
View of the docking approach of Endeavour taken during Expedition Three
ISS028-E-015414 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015652  (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015132 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015098 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015601  (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015117 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
STS088-335-006 (4-15 Dec. 1998) --- Astronaut Nancy J. Currie, mission specialist, looking out the aft flight window, works the controls of the Remote Manipulator System (RMS) arm onboard the Earth-orbiting Space Shuttle Endeavour.  She was in the process of moving the stowed United States-built Unity Module (Node 1) into a docked configuration with Endeavour?s docking system.  This process preceded rendezvous and docking with the Russian-built FGB Module (Zarya).
Currie on the flight deck during Node 1 grapple
ISS028-E-015147 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM).  An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015146 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of the six crewmembers on the International Space Station as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015398 (10 July 2011) ---  This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three  crewmembers – half the International Space Station crew – who were equipped with still cameras for this purpose on the station  as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015588  (10 July 2011) --- This picture of Atlantis' main and subsystem engines is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
S100-E-5063 (21 April 2001) --- Astronaut Umberto Guidoni, mission specialist representing the European Space Agency (ESA), totes some notebooks of STS-100 mission data on the flight deck of the Earth-orbiting Space Shuttle Endeavour as the seven-member crew heads for a rendezvous with the International Space Station (ISS).  The image was recorded with a digital still camera
MS Guidoni works on the flight deck of Endeavour
ISS028-E-015596  (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A  1000 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
S75-26927 (July 1975) --- A close-up view of the Commemorative Plaque for the Apollo-Soyuz Test Project. Two plaques divided into four quarters each will be flown on the ASTP mission. A four-part plaque is completely assembled here. The American ASTP crew will carry the four U.S. quarter pieces aboard Apollo; and the Soviet ASTP crew will carry the four USSR quarter sections aboard Soyuz. The eight quarter pieces will be joined together to form two complete commemorative plaques after the two spacecraft rendezvous and dock in Earth orbit. One complete plaque then will be returned to Earth by the astronauts; and the other complete plaque will be brought back by the cosmonauts. The plaque is written in both English and Russian.
View of Commemorative Plaque for ASTP
ISS028-E-015553 (10 July 2011) --- A nadir view of the space shuttle Atlantis and its payload was provided by one of a series of images showing various parts of the shuttle in Earth orbit. Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the International Space Station. The series was photographed by one of three crewmembers -- half the station crew -- who were equipped with still cameras on the orbiting outpost as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015561(10 July 2011) --- A nadir view of the space shuttle Atlantis and its payload was provided by one of a series of images showing various parts of the shuttle in Earth orbit. Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the International Space Station. The series was photographed by one of three crewmembers -- half the station crew -- who were equipped with still cameras on the orbiting outpost as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015461 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the orbiting outpost. A  400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015379 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the orbiting outpost. An 800 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver  
ISS028-E-015566 (10 July 2011) --- A nadir view of the space shuttle Atlantis and its payload was provided by one of a series of images showing various parts of the shuttle in Earth orbit. Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the International Space Station. The series was photographed by one of three crewmembers -- half the station crew -- who were equipped with still cameras on the orbiting outpost as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015567(10 July 2011) --- A nadir view of the space shuttle Atlantis and its payload is provided by one of a series of images showing various parts of the shuttle in Earth orbit. Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the International Space Station. The series was photographed by one of three crewmembers -- half the station crew -- who were equipped with still cameras on the orbiting outpost as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015556 (10 July 2011) --- A nadir view of the space shuttle Atlantis and its payload was provided by one of a series of images showing various parts of the shuttle in Earth orbit. Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the International Space Station. The series was photographed by one of three crewmembers -- half the station crew -- who were equipped with still cameras on the orbiting outpost as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015517 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the orbiting outpost. A  400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015571 (10 July 2011) --- A nadir view of the space shuttle Atlantis and its payload is provided by one of a series of images showing various parts of the shuttle in Earth orbit. Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the International Space Station. The series was photographed by one of three crewmembers -- half the station crew -- who were equipped with still cameras on the orbiting outpost as the shuttle “posed” for photo and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). A 400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015445 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the orbiting outpost. A  400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015465 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the orbiting outpost. A  400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver
ISS028-E-015451 (10 July 2011) --- This is one of a series of images showing various parts of the space shuttle Atlantis in Earth orbit as photographed by one of three crew members -- half the station crew -- who were equipped with still cameras for this purpose on the International Space Station as the shuttle “posed” for photos and visual surveys and performed a back-flip for the rendezvous pitch maneuver (RPM). Seen at the rear of the cargo bay is the Raffaello multi-purpose logistics module, packed with supplies and spare parts for the orbiting outpost. A  400 millimeter lens was used to capture this particular series of images.
Mapping Sequence performed during the STS-135 R-Bar Pitch Maneuver