SLS INTERTANK TEST ARTICLE IS ATTACHED TO CROSSHEAD OF LOAD TEST ANNEX, BLDG. 4619, AND REMOVED FROM BED OF KMAG TRANSPORTER. Matt Cash conducts tag up meeting before lift of ITA from KMAG transporter

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. ITA is slowly raised from bed of KMAG transporter and KMAG is removed.

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. ITA is slowly raised from bed of KMAG transporter and KMAG is removed.

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. ITA is slowly raised from bed of KMAG transporter and KMAG is removed.

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. ITA is slowly raised from bed of KMAG transporter and KMAG is removed.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

The Liquid Oxygen Test Article was lifted onto the Kmag. Various electronic components will be installed then the article will be moved into test stand 4697.

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. ITA is suspended from crosshead of Load Test Annex

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. Rob Ziegler, L, and Roger Myrick, R, of Aerie Aerospace attach load lines to Aft Load Ring of Intertank Test Articlle

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. Rob Ziegler, (L), and Roger Myrick (R), of Aerie Aerospace attach load lines to Aft Load Ring of Intertank Test Article.

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. Rob Ziegler, (L), and Roger Myrick (R), of Aerie Aerospace attach load lines to Aft Load Ring of Intertank Test Article.

SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619, and removed from bed of KMAG transporter. Rob Ziegler, (L), and Roger Myrick (R), of Aerie Aerospace attach load lines to Aft Load Ring of Intertank Test Article.

Launch Vehicle Stage Adapter being loaded on the KMag for transportation to building 4707 for further testing.

Launch Vehicle Stage Adapter being loaded on the KMag for transportation to building 4707 for further testing.

Launch Vehicle Stage Adapter being loaded on the KMag for transportation to building 4707 for further testing.

A Jacobs technician from the Launch Equipment Shop performs welding on the KAMAG spacecraft transporter on Oct. 26, 2018, inside a facility at the crawler yard at NASA’s Kennedy Space Center in Florida. The transporter is designed to carry heavy loads. Welding is being performed on the attach points that will hold the Orion transportation pallet in place. Testing of the pallet will be performed to support validation and verification of the attach fittings in the Multi-Payload Processing Facility.

A Jacobs technician from the Launch Equipment Shop performs welding on the KAMAG spacecraft transporter on Oct. 26, 2018, inside a facility at the crawler yard at NASA’s Kennedy Space Center in Florida. The transporter is designed to carry heavy loads. Welding is being performed on the attach points that will hold the Orion transportation pallet in place. Testing of the pallet will be performed to support validation and verification of the attach fittings in the Multi-Payload Processing Facility.

Jacobs technicians from the Launch Equipment Shop perform welding on the KAMAG spacecraft transporter on Oct. 26, 2018, inside a facility at the crawler yard at NASA’s Kennedy Space Center in Florida. The transporter is designed to carry heavy loads. Welding is being performed on the attach points that will hold the Orion transportation pallet in place. Testing of the pallet will be performed to support validation and verification of the attach fittings in the Multi-Payload Processing Facility.

The KAMAG spacecraft transporter is inside a facility at the crawler yard at NASA's Kennedy Space Center in Florida, on Oct. 26, 2018. Jacobs technicians from the Launch Equipment Shop are welding the attach points that will hold the Orion transportation pallet in place. Testing of the pallet will be performed to support validation and verification of the attach fittings in the Multi-Payload Processing Facility. The transporter is designed to carry heavy loads, including the pallet that will contain the Orion crew module.

A Jacobs technician from the Launch Equipment Shop performs welding on the KAMAG spacecraft transporter on Oct. 26, 2018, inside a facility at the crawler yard at NASA’s Kennedy Space Center in Florida. The transporter is designed to carry heavy loads. Welding is being performed on the attach points that will hold the Orion transportation pallet in place. Testing of the pallet will be performed to support validation and verification of the attach fittings in the Multi-Payload Processing Facility.

Robert Bobo, standing extreme right, and technicians view as SLS Intertank Test Article, ITA, is attached to crosshead of load test Annex, Bldg. 4619

On July 13, 2021, inside the Commercial Crew and Cargo Processing Facility at Kennedy Space Center in Florida, Boeing’s CST-100 Starliner spacecraft moved from Hazardous Processing Area to the Weight and Center of Gravity machine and then transferred to the KMAG. The operations are in preparation for the company’s second Orbital Flight Test (OFT-2), as part of NASA’s Commercial Crew Program.

Inside the Launch Abort System Facility (LASF) at NASA’s Kennedy Space Center in Florida, the fully assembled Orion spacecraft for the agency’s Artemis I mission is prepared for transport on Oct. 18, 2021. In the early morning hours of Oct. 19, Orion was moved from the LASF into the Vehicle Assembly Building, where teams with the agency’s Exploration Ground Systems and contractor Jacobs will lift and lower the spacecraft on top of the Space Launch System (SLS) rocket to complete assembly of NASA’s Moon rocket. The first in an increasingly complex set of missions, Artemis I will be an integrated flight test for Orion and SLS ahead of crewed flights to the Moon.

Inside the Launch Abort System Facility (LASF) at NASA’s Kennedy Space Center in Florida, the fully assembled Orion spacecraft for the agency’s Artemis I mission is prepared for transport on Oct. 18, 2021. In the early morning hours of Oct. 19, Orion was moved from the LASF into the Vehicle Assembly Building, where teams with the agency’s Exploration Ground Systems and contractor Jacobs will lift and lower the spacecraft on top of the Space Launch System (SLS) rocket to complete assembly of NASA’s Moon rocket. The first in an increasingly complex set of missions, Artemis I will be an integrated flight test for Orion and SLS ahead of crewed flights to the Moon.

Inside the Launch Abort System Facility (LASF) at NASA’s Kennedy Space Center in Florida, the fully assembled Orion spacecraft for the agency’s Artemis I mission is prepared for transport on Oct. 18, 2021. In the early morning hours of Oct. 19, Orion was moved from the LASF into the Vehicle Assembly Building, where teams with the agency’s Exploration Ground Systems and contractor Jacobs will lift and lower the spacecraft on top of the Space Launch System (SLS) rocket to complete assembly of NASA’s Moon rocket. The first in an increasingly complex set of missions, Artemis I will be an integrated flight test for Orion and SLS ahead of crewed flights to the Moon.